Hydrocide

A New Approach To Eliminate Pet Odors

HydroCide uses a unique chemistry that eliminates the need to use urine pretreatment products and slow acting enzyme deodorants. HydroCide contains unique ingredients that use a combination of counteraction, absorption, bonding, and inhibiting residuals to completely eliminate foul organic malodors, even difficult-to-eliminate male cat “marking scents”.

HydroCide’s new approach to an old problem offers advantages over other so-called pet odor products. No longer do you have to rely on ineffective and messy powders or hazardous chemicals.

For the first time, the consumer not only treats the surface but can reach the source of the odor problem.

HydroCide corrects the tough pet odor problems encountered daily by professional carpet cleaners, veterinarians, breeders and pet shops.

HydroCide is the complete do-it-yourself pet odor elimination system which provides professional results and is backed up by a money back guarantee.

Frequently Asked Questions

What It Is
A unique chemistry that safely and immediately eradicates, on contact, amine, mercaptan, androsterone, indole, skatole, metabolite, and phenol odors.

How It Differs

Permanent (unlike fragrances).
Stops remaining bacteria-produced odors (unlike germicides).
Works with detergents and disinfectants (unlike enzymes).
Treats more than sulfur-based odors (unlike oxidizers).
How It Works Differently

HydroCide uses no problematic enzymes, bacteria, oxidizers or olfactory desensitizers. Instead, HydroCide uses a combination of: counteraction, bonding (chemisorption) and absorption. This technology permanently eliminates, not masks, odors on contact irrespective of what has been tried before.

Absorption. This is the physical penetration of the malodor substance into the inner molecular structures of the product.
Bonding (chemisorption). Involves the exchange or sharing of electrons between the malodor atoms and those of the product. This is a very quick-acting technology. However, if used alone, it will not be a permanent solution. Depending upon the malodor, desorption of between 10 to 50% may take place over a period of 30 minutes to 4 hours (the odor comes back).
Counteraction. A phenomenon that occurs when the proper two odors are physically in the same area, with the overall odor being reduced instead of increased. This method is termed neutralization when no odor results and reodorization when a milder pleasant odor replaces the malodor. It works through Zwaardemaker pairs (conjugates), pairs of odorants that neutralize each other’s respective odors. This principle works by having the counteractant in the same physical state as the malodor. Thus it can be effective on solids, liquids and gases.
Safe To Use

Nontoxic
Nonirritating
Non staining
Non corrosive
Non carcinogenic
Nonionic
Nonflammable
Biodegradable

Product Uses

For Use On: any water safe surface including carpeting, rugs, fabrics, upholstery, curtains, drapes, tile, wood, mattresses, car interiors, clothing, boats, nylon, cotton, acrylic, plastic, vinyl, rayon, olefin, polyester, leather, trash containers, concrete, etc.

Directions:

Always test fabric/fiber for color fastness in an inconspicuous area.

HydroCide is easy to use. Locate the Contaminated Areas, the Most Important Step!

Step 1.
One time need: dilute at the ratio of 4 to 8 ounces per gallon of water depending on the severity of the odor to spray on carpet, upholstery or hard surfaces. Important, always apply enough to penetrate to imbedded odor sources. Spray directly onto problem areas with any type of sprayer.

Or, simply pour HydroCide on, making certain that you have covered the soiled area completely and with enough volume to soak through the carpet and the pad and into the floor. Let it dry. That’s it.

Prespray Additive: Add up to eight ounces per gallon of ready to use prespray to deal with odors prior to cleaning. Be aware that the addition of HydroCide may neutralize some fragrances.

Comments are closed.